Enter your registered email:
Indtast ny adgangskode:

DAV H2/W2

​Bridge guard

DAVH2 / W2

The bridge guard is based on the principles of the well-known S100 bridge guard. DAV H2/W2 is crash tested to European standards and meets the requirements of EN 1317-2 and EN 1317-5. With a sceptre distance of 3.0 meters, the bridge guard can be mounted on bolt groups established for the formerly widely used S100 bridge guard. 

The bridge guard can be fitted with or without B-profiles as per the customer's wishes, and with or without fill bars. All reject-beams are horizontal and with built-in deformation brackets, which ensures an ASI value B. A newly developed "A-bracket" ensures good power transmission and helps ensure a fantastic course on collision where the risk of injury to other road users is minimised. All bolt assemblies are placed in vertical surfaces, just as horizontal "closed" surfaces do not exist so that the risk of "water pockets" is minimised to ensure a longer life span.

Bolts are supplied with rounded heads to avoid protruding edges.

DAV H2/W2 is used on bridge structures where normal requirements are set for a CE marked bridge guard.

System description

DAV H2/W2 was launched in 2014 and a new deformation bracket ensures that the ASI value can be classified as ASI B without affecting the strength level. The height is 1.20 m and the strength class is H2.

​​

Assembly

The bridge guard is mounted with a sceptre distance of 3.0 meters and can be mounted with or without B-profiles and fill bars. The bridge guard can be mounted on bolt groups for the S100 bridge guard and can thus be used for repairs of the S100.

Product sheet

Certificate